HAOHUA

Professional Rolling Door Motor Manufacturer

Come & visit us

Fujian, China.

Ac Motor Maintenance

  1. Home
  2. /
  3. Knowledge
  4. /
  5. Ac Motor Maintenance

Ac motor maintenance:

Preparation and inspection before starting

1. Check whether the grounding of the electric and starting equipment is reliable and complete, and whether the wiring is correct and good.

2. Check whether the voltage and frequency shown on the motor nameplate are consistent with the power supply voltage and frequency.

3. The relative phase and insulation resistance of windings should be checked before starting the newly installed or long-stopped motor. The insulation group shall be larger than 0.5 megohm, if lower than this value, the winding shall be dried.

4. For the wound rotor, check whether the brush device on the collector ring can work normally and whether the brush pressure meets the requirements.

5. Check whether the motor is rotating flexibly and whether the oil in the sliding bearing reaches the specified oil level.

6. Check whether the rated current of the fuse used by the motor meets the requirements.

7. Check whether the fastening bolts and mounting bolts of the motor are tightened.

The ac motor can be started after all the above inspections meet the requirements. After the motor is started, it shall run for about 30 minutes without load. Please pay attention to whether there is any abnormal phenomenon of the motor, such as noise, vibration, heating and other abnormal conditions. Measures shall be taken.

When starting the wound motor, the starting rheostat should be connected to the rotor circuit. For the motor with brush lifting mechanism, put down the brush, disconnect the short-circuit device, close the stator circuit switch and switch the rheostat. When the motor is close to the rated speed, lift the brush, close the short circuit device, the motor starts.

Product Recommendation

dc24v-400kg-220v-industrial-roller-shutter27145320481.jpg

24v Dc Roller Door Motor

?This kind of 24v dc roller door motor is widely used in a variety of electric lift doors and windows, shading systems, projection screens and other products.

Read More
fjj2450-3p-2000kg-metal-stainless-steel17013010058.jpg

FJJ2450-3P-(2000Kg) Metal Stainless Steel Emergency Protection Fire Rated Proof Door Motors

Quick Details Packaging & Delivery Product Description Company Information Packaging & Shipping FAQ Certifications

 

Read More
automatic-rolling-gate-roller-door-motor38001261705.jpg

Automatic Rolling Gate Roller Door Motor

Overview Quick Details Packaging & Delivery Packaging Details:Standard exporting carton 1.Door motor individually carton 2.Rack and accessories in another individually carton 3.Durable package with Foam Delivery Time:Shipped in 7 days after payment Product Description Company Information…

Read More
dc24v-300kg-24-volt-dc-motor-roller-shutter31232893413.jpg

DC24V-300KG 24 Volt DC Motor Roller Shutter Door Motor Price

Quick Details Packaging & Delivery Product Description This kind of rolling door motor / rolling shutter motor / roller door motor / roller shutter motor use optional power , that in normal power supply sistuation , motor drive with power by utility . If have power off for its electrical…

Read More